The System Preferences dialog box appears.
Select the Apple menu > System Preferences, or select the icon from the Dock.In the Apps search results list, click Command Prompt.On the Windows 8.1 Start page, type command.Note the values that you see for the primary network adapter.įind Your TCP/IP Properties in Microsoft Windows 8.1.At the command prompt, type ipconfig /all and press Enter.In the Cortana search box, type command.Find Your TCP/IP Properties in Microsoft Windows 10 If you use a private IP address, you can have problems with some features, such as virtual private networking. We recommend that you get a public IP address for your Firebox external IP address. If your ISP assigns your computer an IP address that starts with 10, 192.168, or 172.16 to 172.31, then your ISP uses NAT (Network Address Translation) and your IP address is private. IP addresses of primary and secondary DNS servers.Whether your computer has a static or dynamic IP address.You must have this information to install your Firebox: View or change the current HTTPS setting.To learn about the properties of your network, look at the TCP/IP properties of your computer or any other computer on the network. View or change the backup DNS server addresses. View or change the current DNS server address. View or change the current WINS server address. When enabled, the printer can be monitored and managed remotely using a Web browser. Note: Yes is the factory default setting.Įnable the built-in FTP server, which lets you send files to the printer using File Transfer Protocol.Įnable the built-in Web server (Embedded Web Server). Specify the Zero Configuration Networking setting.
Specify the BOOTP address assignment setting. Note: Off is the factory default setting. Specify the RARP address assignment setting. Specify the DHCP address and parameter assignment. View or change the current TCP/IP gateway. View or change the current TCP/IP netmask. It also sets Enable BOOTP and Enable RARP to Off on systems that support BOOTP and RARP. Note: Manually setting the IP address sets the Enable DHCP and Enable Auto IP settings to Off. View or change the current TCP/IP address. Note: This can be changed only from the Embedded Web Server. Note: This menu is available only in network printers or printers attached to print servers. To access the menu, navigate to either of the following:
0 kommentar(er)
